TM-9-2350-260-20-1-3

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 3 OF 4 CHAPTERS 10 THRU 15

TM-9-2350-260-20-1-3 - Page 489 of 783

TM 9-2350-260-20-1-3

SERVOBANDS ADJUSTMENT (Sheet 4 of 4)

6.

Using socket (Item 6, Chapter 3, Section I) on locknut (D) and 1-1/16 inch wrench on adjusting nut (C), hold adjusting

nut (C) stationary and tighten locknut (D).

7.

Using torque wrench and socket (Item 6, Chapter 3, Section I), torque locknut (D) to 150 lb-ft (203 N

•

m).

8.

Check scribe mark on adjusting nut (C) and transmission case for alinement and repeat complete adjustment

procedure if out of alinement.

9.

Using 9/16 inch socket, install lock plate (B) using bolt and washer (A).

10. Install transmission shroud (page 9-23).

End of Task

TA146612

11-58