TM-9-2350-260-20-1-3

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 3 OF 4 CHAPTERS 10 THRU 15

TM-9-2350-260-20-1-3 - Page 475 of 783

TM 9-2350-260-20-1-3

SHIFTING CONTROL BRACKET AND CONNECTING LINK ASSEMBLY REPAIR (Sheet 1 of 9)

PROCEDURE INDEX

PROCEDURE

PAGE

Removal

11-45

Disassembly

11-47

Assembly

11-50

Installation

11-51

TOOLS:

7/16 in. socket with 1/2 in. drive

5/16 in. combination box and

9/16 in. socket with 1/2 in. drive

open end wrench

9/16 in. socket with 3/8 in. drive

5 in. extension with 1/2 in. drive

Ratchet with 1/2 in. drive

Torque wrench with 3/8 in. drive

1/8 in. drive punch

(0-200 lb-in)

1/2 in. drive punch

3/4 in. pin punch

9/16 in. combination box and

6 in. rule

open end wrench

Grease gun

3/4 in. combination box and

Vise

open end wrench

Hammer

7/16 in. combination box and

2 in. extension with 3/8 in. drive

open end wrench

5 in. extension with 3/8 in. drive

SUPPLIES:

Steel welding rod 1/8 in. dia.

Lockwasher (MS35338-63)(9 required)

Gasket (10911621)

Lockwasher (MS35338-46)(3 required)

Grease (Item 37, Appendix D)

REFERENCE:

TM 9-2350-260-10

PRELIMINARY PROCEDURE:

Remove powerplant (page 5-1)

Go on to Sheet 2

TA146598

11-44