TM 9-2350-260-20-1-3
SHIFTING CONTROL BRACKET AND CONNECTING LINK ASSEMBLY REPAIR (Sheet 2 of 9)
REMOVAL:
1.
Lift shaft assembly from link assembly.
2.
Using 7/16 inch socket, remove four screws (A) and lockwashers (B) securing spacer (C) and gasket (D).
Throw
lockwashers away.
3.
Remove spacer (C) and gasket (D).
Throw gasket (D) away.
4.
Using 7/16 inch socket, remove screw (E) from clamp (F).
5.
Remove clamp (F).
6.
Push cable (G) aside.
Go on to Sheet 3
TA146599
11-45