TM-9-2350-260-20-1-3

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 3 OF 4 CHAPTERS 10 THRU 15

TM-9-2350-260-20-1-3 - Page 507 of 783

TM 9-2350-260-20-1-3

TRANSMISSION OIL BREATHER TUBE REPLACEMENT (Sheet 3 of 3)

INSTALLATION:

7.

Manually start nut (B) onto elbow (C).

8.

Using 7/8 inch wrench, install coupling nut (B) onto

elbow (C).

9.

Start engine.

Check for exhaust leaks at

transmission oil breather tube (E) connections.

10. Install transmission shroud (page 9-23).

1.

Manually start elbow (A) into transmission.

2.

Using 3/4 inch wrench, install elbow (A).

Make sure

hole in elbow (A) is pointing toward nut (B).

3.

Manually install elbow (C) into nut (D).

4.

Using 7/8 inch wrench on nut (D) and 3/4 inch

wrench on elbow (C), tighten nut (D).

5.

Position tube (E) between elbow (A) and nut (B).

If

necessary, use 3/4 inch wrench to aline elbow (A)

with nut (F).

6.

Manually start nut (F) onto elbow (A) and tighten

with 7/8 inch wrench.

End of Task

TA146630

11-76