TM-9-2350-260-20-1-3

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 3 OF 4 CHAPTERS 10 THRU 15

TM-9-2350-260-20-1-3 - Page 510 of 783

TM 9-2350-260-20-1-3

FINAL DRIVE (LEFT AND RIGHT) REPLACEMENT (Sheet 2 of 4)

REMOVAL

1.

Check whether lifting eye (A) is installed in

final drive (B).

2.

If lifting eye (A) is installed in final drive (B),

check it for distortion or cracks.

3.

If lifting eye (A) is distorted or cracked, using pinch bar through eyehole (C), turn and remove lifting eye (A) from final

drive (B).

4.

Using fingers, star threads of new lifting eye (A) into final drive (B).

5.

Using pinch bar, turn and tighten lifting eye (A).

6.

If lifting eye (A) is not installed in final drive (B),

using socket wrench handle, remove plug from lifting

eyehole in final drive (B).

7.

Install new lifting eye (A) as in steps 4 and 5 above.

CAUTION

Use hoist with 1100 pounds minimum

capacity.

8.

Connect hoist to lifting eye (A) on final drive (B).

Go on to Sheet 3

TA146634

12-3