TM-9-2350-260-20-1-3

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 3 OF 4 CHAPTERS 10 THRU 15

TM-9-2350-260-20-1-3 - Page 519 of 783

TM 9-2350-260-20-1-3

UNIVERSAL JOINT REPLACEMENT (Sheet 2 of 7)

REMOVAL:

NOTE

Turn quick-disconnect clamp until it

is in working position.

1.

Using cutting pliers, cut lockwire (A).

2.

Using 3/4 inch socket, remove screw (B).

3.

Open quick-disconnect clamp (C).

4.

Remove quick-disconnect clamp (C).

5.

Place large crowbar (D) in position to support final

drive.

6.

While holding down on large crowbar (D), use small

pinch bar (E) to pry final drive adapter assembly (F)

until it comes loose from final drive flange (G).

CAUTION

Use rope capable of picking up and

holding at least 92 pounds.

7.

Attach rope (H) (Item 64, Appendix D) loosely to

universal joint.

Go on to Sheet 3

12-12

Change 2