TM-9-2350-260-20-1-3

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 3 OF 4 CHAPTERS 10 THRU 15

TM-9-2350-260-20-1-3 - Page 524 of 783

TM 9-2350-260-20-1-3

UNIVERSAL JOINT REPLACEMENT (Sheet 5 of 7)

CAUTION

Use rope capable of picking up and holding at least 92 pounds.

5.

Using rope (Item 65, Appendix D) and crowbar, position universal joint (B) into general position in tank.

6.

Inset aliening punch through one screw hole (E) and into corresponding final drive adapter assembly screw hole to

align universal joint

NOTE

Turn final drive adapter assembly (F) left or right to install four screws (E) and two

lockwires (G) (Item 60, Appendix D).

7.

Align three remaining screw holes (E) with final drive adapter assembly (F).

8.

Start threads of three screws (E) by hand.

9.

Remove aligning punch from fourth screw hole.

10. Start threads of fourth screw (E) by hand.

Go on to Sheet 6

TA146646

12-15