TM-9-2350-260-20-1-3

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 3 OF 4 CHAPTERS 10 THRU 15

TM-9-2350-260-20-1-3 - Page 528 of 783

TM 9-2350-260-20-1-3

UNIVERSAL JOINT REPAIR (Sheet 2 of 2)

9.

Turn universal joint over.

Repeat steps 5 thru 8 to remove second spider assembly from coupling plate.

10. Replace coupling plate and each spider in its entirety if any component within an assembly is cracked or broken.

ASSEMBLY:

1.

Using wrench, replace lubrication fitting (A), if

removed.

2.

Place coupling plate (B) and either spider assembly

(C) on side.

3.

Place spider assembly (C) into position on coupling

plate (B).

4.

Using hammer, gently tap spider assembly (C) and

coupling plate (B) into snug fit.

5.

Using socket install four screws (D).

6.

Using socket and torque wrench, tighten screws (D)

to 115-130 lb-ft (155-175 N

•

m).

7.

Turn universal joint over.

Repeat steps 1 through 6.

8.

Place universal joint on end.

9.

Using slip joint pliers, attach lockwire (E) (Item 60,

Appendix D) to each two adjacent screws (F).

10. Using lubricating oil (Item 44, Appendix D), oil

universal joint assembly.

11. Install universal joint (page 12-14).

End of Task

TA146650

12-19/(12-20 blank)