TM-9-2350-260-20-1-3

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 3 OF 4 CHAPTERS 10 THRU 15

TM-9-2350-260-20-1-3 - Page 535 of 783

TM 9-2350-260-20-1-3

BRAKES ADJUSTMENT (Sheet 6 of 8)

19. If index line (B) marked A does not move back to

index mark (C), brake is too tight.

20. Using 7/16 inch wrench, turn brake adjusting worm

(F) about 25 turns toward opposite direction of arrow

(G).

17. Release brakes.

18. Using 7/16 inch wrench, turn brake adjusting worm

(F) in direction of arrow (G) until index line (B) lines

up with index mark (C).

NOTE

Always try to bring index line (B) marked A, and index mark (C) into line by turning

brake adjusting worm (F) counterclockwise.

CAUTION

Always release brakes before making adjustments.

21. Using 7/16 inch wrench, turn brake adjusting worm (F) in direction of arrow (G) until index line (B) marked A, lines up

with index mark (C) when brakes are applied.

Go on to Sheet 7

TA146295

13-7