TM-9-2350-260-20-1-3

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 3 OF 4 CHAPTERS 10 THRU 15

TM-9-2350-260-20-1-3 - Page 544 of 783

TM 9-2350-260-20-1-3

BRAKE LINKAGE ADJUSTMENT (Sheet 7 of 17)

42. Using 3/4 inch wrench, loosen jamnuts (AB) and

(AC).

43. Using 3/4 inch socket, remove screw and

lockwasher (AD) and screw and lockwasher (AE).

Throw lockwashers away.

44. Using 3/4 inch wrench, remove rod end bearing (AF)

from lever (J) and rod end bearing (AG) from

adjuster (AH).

45. Insert alinement pin in alinement hole (G).

46. Position lever assembly (Z) completely back in guide

assembly (AA).

47. Using 3/4 inch wrench, adjust rod end bearing (AF) counterclockwise until screw (AE) can be slipped freely through

lever (J) and rod end bearing (AF).

48. Using 3/4 inch socket, install new lockwasher and screw (AE) through rod end bearing (AF) and lever (J).

49. Using 3/4 inch wrench, tighten jamnut (AC) up against rod end bearing (AF).

Remove alinement pin from alinement

hole (G).

Go on to Sheet 8

TA146304

13-16