TM-9-2350-260-20-1-3

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 3 OF 4 CHAPTERS 10 THRU 15

TM-9-2350-260-20-1-3 - Page 534 of 783

TM 9-2350-260-20-1-3

BRAKES ADJUSTMENT (Sheet 5 of 8)

9.

Using 7/8 inch wrench, install brake adjusting worm

cap (D).

10. Fully apply brakes (TM 9-2350-260-10).

11. Check whether index line (B) marked A and index

mark (C) are lined up.

12. If index line (B) marked A and index mark (C) are

lined up within 1/64 inch brakes are adjusted.

Release brakes and go to step 24.

13. If index line (B) marked A, and index mark (C) are

not lined up within 1/64 inch, release brakes and go

to step 14.

14. Using 7/8 inch wrench, remove brake adjusting

worm cap (D).

15. Using 15/16 inch wrench, loosen locknut (E).

16. Fully apply brakes (TM 9-2350-260-10).

If index

line (B) marked A, moves past index mark (C),

brake is too loose.

Go on to Sheet 6

TA146294

13-6