TM-9-2350-260-20-1-3

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 3 OF 4 CHAPTERS 10 THRU 15

TM-9-2350-260-20-1-3 - Page 526 of 783

TM 9-2350-260-20-1-3

UNIVERSAL JOINT REPLACEMENT (Sheet 7 of 7)

16. Remove rope from universal joint.

17. Fit quick-disconnect clamp (L) over grooves in final

drive flange and final drive adapter assembly.

18. Hold quick-disconnect clamp (L) over grooves in

final drive flange and final drive adapter assembly.

19. Close quick-disconnect clamp (L).

20. Using 3/4 inch socket, install one screw (M).

21. Using torque wrench, torque screw (M) to 25 lb-ft (34 N

•

m).

22. Using slip joint pliers, install lockwire (N) (Item 60, Appendix D) to screw (M) and quick-disconnect clamp (L).

23. Using 1-1/2 inch wrench, install tube (P) to transmission.

24. Install right exhaust pipe (page 8-11) or left exhaust pipe (page 8-7).

25. Lubricate (LO 9-2350-260-12).

26. Install transmission shroud support (page 9-38).

27. Push transmission mounting guide towards transmission and lock into place (page 5-18).

28. Install transmission shroud (page 9-23).

29. Install top deck (page 16-22).

30. Remove track blocks.

End of Task

TA146648

Change 2

12-17