TM-9-2350-260-20-1-3

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 3 OF 4 CHAPTERS 10 THRU 15

TM-9-2350-260-20-1-3 - Page 527 of 783

TM 9-2350-260-20-1-3

UNIVERSAL JOINT REPAIR (Sheet 1 of 2)

TOOLS:

Torque wrench with 1/2 in. drive (0-175 lb-ft)

13/16 in. socket with 1/2 in. drive

18 in. hinged handle with 1/2 in. drive

3/8 in. combination box and open end wrench

Diagonal cutting pliers

Slip joint pliers

Hammer

26 in. pinch bar

SUPPLIES:

Lockwire (Item 60, Appendix D)

Oil (Item 44, Appendix D)

PRELIMINARY PROCEDURE:

Remove universal joint from tank (page 12-12)

DISASSEMBLY:

1.

Place universal joint on end (A).

2.

Using cutting pliers, cut four lockwires (B).

Remove

lockwires.

3.

Using socket and hinged handle, loosen eight

screws (C).

Using hammer, gently tap hinge handle

to loosen screws, if necessary.

4.

Place universal joint on side (D).

5.

Using socket and hinged handle, remove four

screws (C).

6.

Using pinch bar, pry loose spider assembly (E) from

coupling plate (F).

7.

Lift spider assembly (E) from coupling plate (F).

8.

Using wrench, remove two lubrication fittings (G) if

damaged or broken.

Go on to Sheet 2

TA146649

12-18

I

U.S. GOVERNMENT PRINTING OFFICE : 1994 - 300-421 (03022)