TM-9-2350-260-20-1-3

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 3 OF 4 CHAPTERS 10 THRU 15

TM-9-2350-260-20-1-3 - Page 541 of 783

TM 9-2350-260-20-1-3

BRAKE LINKAGE ADJUSTMENT (Sheet 4 of 17)

22. Using slip joint pliers, rotate rod (R) clockwise or

counterclockwise until brake levers (P) and (Q) are

touching.

23. Perform step 18.

24. Using 3/4 inch socket, remove screw and

lockwasher (K) and remove rod end bearing (N) from

lever (J).

25. Using 3/4 inch wrench, adjust rod end bearing (N)

clockwise until rod (R) is past hole (S).

26. Using 3/4 inch socket, remove screw and lockwasher (U) and remove rod end bearing (V) from lever (P).

Throw

lockwasher away.

27. Using 3/4 inch socket, install new lockwasher and screw (K) through rod end bearing (N) and lever (J).

28. Using 3/4 inch wrench, adjust rod end bearing (V) by turning clockwise or counterclockwise until screw (U) will drop

freely through rod end bearing (V) and lever (P).

Go on to Sheet 5

TA146301

13-13