TM-9-2350-260-20-1-3

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 3 OF 4 CHAPTERS 10 THRU 15

TM-9-2350-260-20-1-3 - Page 539 of 783

TM 9-2350-260-20-1-3

BRAKE LINKAGE ADJUSTMENT (Sheet 2 of 17)

1.

Place transmission shift lever in 'N' position.

If parking brake will not release, go to step 2.

If parking brake releases,

go to step 12.

2.

Using diagonal pliers, remove cotter pin (A).

Throw

cotter pin away.

3.

Using long nose pliers, remove pin (B).

4.

Remove clevis (C) from lever (D).

5.

Install alinement pin (E) into alinement hole.

6.

Using 7/16 inch wrench, loosen jamnut (F).

7.

Place shift lever into 'N' position and hold.

8.

Adjust clevis (C) until pin (B) can be installed

through clevis (C) and lever (D).

9.

Install pin (B) and, using long nose pliers, install new

cotter pin (A).

10. Release shift lever, shift lever should remain in 'N' position.

11. Using 7/16 inch wrench, tighten jamnut (F) up against clevis (C).

Remove alinement pin (E).

Go on to Sheet 3

TA146299

13-11