TM-9-2350-260-20-1-3
TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)
TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 3 OF 4 CHAPTERS 10 THRU 15
TM-9-2350-260-20-1-3 - Page 553 of 783
TM 9-2350-260-20-1-3
BRAKE LINKAGE ADJUSTMENT (Sheet 16 of 17)
109.
Remove all alinement pins.
110.
Check clearance between stop (BV) and lever
assembly
(BW).
Clearance
should
be
approximately 1/8 inch.
If clearance is proper go
on to step 112.
If clearance must be corrected, go
on to step 111.
111.
Using 9/16 inch wrench, loosen screws (BX) and
adjust stop (BV) to clear lever assembly (BW) by
approximately 1/8 inch.
Tighten screws (BX)
when adjustment is made.
Go on to step 112.
Go on to Sheet 17
TA146313
13-25
Back to Top
