TM-9-2350-260-20-1-3

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 3 OF 4 CHAPTERS 10 THRU 15

TM-9-2350-260-20-1-3 - Page 560 of 783

TM 9-2350-260-20-1-3

BRAKE PEDAL AND ROD ASSEMBLIES REPAIR AND REPLACEMENT (Sheet 6 of 8)

ASSEMBLY:

1.

Using vise, install three bearings (A) in lever (B).

NOTE

Bearings (A) must be flush with

surface of lever assembly (B).

2.

Using vise, install three bearings (C) in lever (D).

NOTE

Bearing (C) must be flush with

surface of lever assembly (D).

3.

Place rod (E) in vise.

4.

Install two jamnuts (F) on rod (E).

5.

Install two rod end bearings (G) on rod (E) the same number of turns recorded during removal.

6.

Using 3/4 inch wrench to hold rod end bearing (G) and another 3/4 inch wrench on jamnut (F), tighten two jamnuts (F)

against rod end bearings (G).

7.

Remove rod assembly (E) from vise.

Go on to Sheet 7

TA146320

13-32