TM 9-2350-260-20-1-3
BRAKE PEDAL AND ROD ASSEMBLES REPAIR AND REPLACEMENT (Sheet 3 of 8)
8.
Using hands, remove lever (J) and two flat washers
(K) from bracket (L).
9.
Using hands, remove lever (M) and two flat washers
(N) from bracket (L).
4.
Using 3/4 inch wrench, remove screw (D) and
lockwasher (E).
Throw lockwasher away.
5.
Using 7/16 inch wrench, loosen nuts (F).
6.
Using 1/4 inch wrench, back off setscrews (G) from
pins (H).
7.
Using slip joint pliers, remove two straight headed
pins (H).
Go on to Sheet 4
TA146317
13-29