TM-9-2350-260-20-1-3

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 3 OF 4 CHAPTERS 10 THRU 15

TM-9-2350-260-20-1-3 - Page 566 of 783

TM 9-2350-260-20-1-3

BRAKE LEVER AND ROD ASSEMBLIES REPAIR AND REPLACEMENT (Sheet 4 of 7)

DISASSEMBLY:

1.

Secure rod assembly (A) in vise.

2.

Using one 3/4 inch wrench on jamnut (B) and another 3/4 inch wrench on bearing (C), loosen two jamnuts (B).

NOTE

Count and write down number of turns required to remove rod end bearing from

rod.

3.

Using 3/4 inch wrench, remove two rod end bearings (C) and two jamnut (B) from rod (A).

4.

Remove rod (A) from vise.

5.

Secure lever assembly (D) in vise.

6.

Using hammer and punch, remove two bearings (E).

7.

Remove lever (D) from vise.

CLEANING AND INSPECTION:

1.

Clean parts in dry cleaning solvent (Item 54, Appendix D).

2.

Inspect all parts for damage.

Replace all unserviceable parts.

Go on to Sheet 5

TA146326

13-38