TM-9-2350-260-20-1-3

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 3 OF 4 CHAPTERS 10 THRU 15

TM-9-2350-260-20-1-3 - Page 575 of 783

TM 9-2350-260-20-1-3

PARKING BRAKE GUIDE AND ROD ASSEMBLIES REPAIR AND REPLACEMENT (Sheet 6 of 14)

16. Secure connecting rod assembly (Q) in vise and,

using two 3/4 inch wrenches, loosen jamnut (R) from

rod end bearing (S).

NOTE

Record number of turns required to

remove rod end bearing (S).

17. Using 3/4 inch wrench, remove rod end bearing (S).

18. Using 3/4 inch wrench, remove jamnut (R).

19. Remove rod (T) from vise.

20. Using 7/16 inch wrench, loosen jamnut (U).

21. Using 1/4 inch allen wrench, remove setscrew (V).

22. Remove jamnut (U) from screw (V).

23. Using 3/4 inch wrench on screw (W) and 3/4 inch

socket on nut (X), remove screw (W) and nut (X).

24. Remove roller (Y) and two thrust washers (Z).

25. Pull levers (AA) and (AB) apart.

26. Remove link (AC) and two trust washers (AD).

27. Remove shaft (AE).

Go on to Sheet 7

TA146335

13-47