TM-9-2350-260-20-1-3

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 3 OF 4 CHAPTERS 10 THRU 15

TM-9-2350-260-20-1-3 - Page 567 of 783

TM 9-2350-260-20-1-3

BRAKE LEVER AND ROD ASSEMBLIES REPAIR AND REPLACEMENT (Sheet 5 of 7)

REPAIR:

Repair consists of replacing any worn or damaged part.

ASSEMBLY:

CAUTION

Bearings (A) must be flush with surface of lever assembly (B).

1.

Using vise, install two bearings (A) in lever (B).

2.

Place rod (C) in vise.

3.

Install two jamnuts (D) on rod (C).

4.

Install two rod end bearings (E) on rod (C) the same number of turns recorded during removal.

5.

Using 3/4 inch wrench to hold rod end bearings (E) and another 3/4 inch wrench on jamnuts (D), tighten two jamnuts

(D) against rod end bearing (E).

6.

Remove rod assembly (C) from vise.

Go on to Sheet 6

TA146327

13-39