TM-9-2350-260-20-1-3

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 3 OF 4 CHAPTERS 10 THRU 15

TM-9-2350-260-20-1-3 - Page 552 of 783

TM 9-2350-260-20-1-3

BRAKE LINKAGE ADJUSTMENT (Sheet 15 of 17)

100.

Using 3/4 inch wrench, loosen jamnut (BR).

101.

Remove screw (AN) and, using 9/16 inch wrench, adjust rod end bearing (BM) until rod (BP) is past alinement hole

(BQ).

102.

Using diagonal pliers, remove cotter pin

(BS).

Throw cotter pin away.

103.

Using slip joint pliers, remove pin (BT) and remove clevis (BU) from equalizer plate (AQ).

104.

Using 3/4 inch socket, install new lockwasher and screw (AN) through lever (BN) and rod end bearing (BM).

105.

Using 3/4 inch wrench, adjust clevis (BU) counterclockwise until pin (BT) can be slipped freely through clevis (BU)

and equalizer plate (AQ).

106.

Install pin (BT) through clevis (BU) and equalizer plate (AQ).

107.

Using long nose pliers, install new cotter pin (BS) through pin (BT).

108.

Using 3/4 inch wrench, tighten jamnut (BR) up against clevis (BU) and jamnut (BL) up against rod end bearing

(BM).

Go on to Sheet 16

TA146312

13-24