TM-9-2350-260-20-1-3

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 3 OF 4 CHAPTERS 10 THRU 15

TM-9-2350-260-20-1-3 - Page 515 of 783

TM 9-2350-260-20-1-3

FINAL DRIVE AIR PRESSURE RELIEF VALVE (LEFT AND RIGHT) REPLACEMENT (Sheet 1 of 1)

TOOLS:

7/16 in.

combination box and open end wrench

PRELIMINARY PROCEDURE:

Remove transmission shroud (page 9-20)

REMOVAL:

1.

Using wrench, remove air pressure valve (A) from installation hole (B) in drive housing.

2.

Inspect air pressure valve to insure that vent cap is free to move on the valve.

Replace as required.

INSTALLATION:

1.

Using wrench, install air pressure valve (A) into installation hole (B).

2.

Install transmission shroud (page 9-23).

End of Task

TA146639

12-8