TM-9-2350-260-20-1-3

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 3 OF 4 CHAPTERS 10 THRU 15

TM-9-2350-260-20-1-3 - Page 589 of 783

TM 9-2350-260-20-1-3

BRAKE ADJUSTER ASSEMBLY REPAIR AND REPLACEMENT (Sheet 2 of 6)

REMOVAL:

1.

Remove block (A) and gasket (B).

2.

Using 3/4 inch socket, remove screw (C) and

lockwasher (D).

Throw lockwasher away.

3.

Remove connecting rod (E) from adjuster assembly

(F).

4.

Using 15/16 inch socket, remove screw (G) and

lockwasher (H).

Throw lockwasher away.

5.

Remove adjuster assembly (F) from enclosure.

9.

Using long nose pliers, remove spring (L) from

adjuster assembly (F).

10. Using diagonal cutting pliers, remove cotter pin (M).

Throw cotter pin away.

11. Remove washer (N), bracket (P), clip (Q), and lever

assembly (R).

6.

Using 9/16 inch socket, loosen three screws (J).

7.

Slide stop (K) from under screws (J).

8.

Remove adjuster assembly (F) from tank to work

bench.

Go on to Sheet 3

TA146349

13-61