TM-9-2350-260-20-1-3

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 3 OF 4 CHAPTERS 10 THRU 15

TM-9-2350-260-20-1-3 - Page 594 of 783

TM 9-2350-260-20-1-3

BRAKE EQUALIZER ASSEMBLY AND LINKAGE ASSEMBLIES REPAIR AND REPLACEMENT (Sheet 1 of 12)

PROCEDURE INDEX

PROCEDURE

PAGE

Removal

13-66

Cleaning and Inspection

13-71

Installation

13-71

TOOLS:

Ratchet with 1/2 in. drive

5/16 in. socket with 1/2 in. drive

3/4 in. socket with 1/2 in. drive

3/4 in. combination box and open end wrench ( required)

7/8 in. combination box and open end wrench

5/16 in. combination box and open end wrench

Slip joint pliers

Diagonal cutting pliers

Long round nose pliers

Steel rule

2 in. extension with 1/2 in. drive

SUPPLIES: Cotter pins (MS24665-353)

Lockwashers (MS35335-37)

(3 required)

Lockwashers (MS35335-37)

Rags

(2 required)

Dry cleaning solvent (Item 54

Lockwasher (MS35338-50)

Appendix D)

Pencil

Tape

REFERENCE: TM 9-2350-260-10

PRELIMINARY PROCEDURE:

Block tracks (TM 9-2350-260-10)

Release parking brakes (TM 9-2350-260-10)

Remove enclosure assembly (page 13-57)

REMOVAL:

1.

Using 15/16 inch socket, remove screw (A) and

lockwasher (B).

Throw lockwasher away.

2.

Remove connecting rod assembly

(C) from adjuster

assembly (D).

Go on to Sheet 2

TA146354

13-66