TM-9-2350-260-20-1-3

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 3 OF 4 CHAPTERS 10 THRU 15

TM-9-2350-260-20-1-3 - Page 586 of 783

TM 9-2350-260-20-1-3

BRAKE ENCLOSURE ASSEMBLY REPLACEMENT (Sheet 2 of 3)

NOTE

If your tank is not equipped with gas

particulate system, skip steps 4, 5,

and 6, and go on to step 7.

4.

Using screwdriver, loosen clamp (D) and remove

hose (E).

5.

Using 9/16 inch wrench, remove three screws and

lockwashers (F).

6.

Displace gas particulate heater unit (G).

INSTALLATION:

1.

Position cover (A) in tank.

2.

Using 9/16 inch socket, install ten screws (B) and

lockwashers (Q).

3.

Position manual fuel shutoff (D) on cover (A).

4.

Using 7/16 inch wrench, install two screws (E) and

lockwashers (F).

7.

Using 7/16 inch wrench, remove two screws (H) and

lockwashers (J).

8.

Displace manual fuel shutoff (K).

9.

Using 9/16 inch socket, remove ten screws (L) and

lockwashers (M).

10. Remove cover (N).

Go on to Sheet 3

TA146346

13-58