TM-9-2350-261-10
CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1
OPERATOR'S MANUAL
TM-9-2350-261-10 - Page 630 of 761
TM 9-2350-261-10
SERVICE BILGE PUMPS — Continued
0086 00
4.
Service front bilge pump. Use flashlight.
5.
Disconnect lead from bilge pump.
6.
Remove two screws, lockwashers, and flat washers securing bilge pump screen to weld nuts. Remove screen. Use
cross tip screwdriver.
7.
Remove mud and debris from bilge pump and screen. If bilge pump needs additional cleaning, notify unit maintenance.
8.
Clean vent hole. Use a wire and run it back and forth in vent hole a few times.
9.
Clean front bilge pump outlet line sight glass as needed. If sight glass must be removed to get it clean, notify unit
maintenance.
0086 00-2
Back to Top
