TM-9-2350-261-10

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

OPERATOR'S MANUAL

TM-9-2350-261-10 - Page 631 of 761

TM 9-2350-261-10

SERVICE BILGE PUMPS — Continued

0086 00

10. Position bilge pump screen on weld nuts and secure with two flat washers, lockwashers, and screws. Use cross tip

screwdriver.

11. Connect lead to bilge pump.

12. Install front access cover on hull and secure with four washers and screws. Use 1/2 inch drive socket wrench handle

and 3/4 inch socket.

13. Close power plant access door (WP 0014 00).

14. Stow trim vane (WP 0047 00).

REAR BILGE PUMP

1.

Lower ramp (WP 0015 00).

008600-3