TM 9-2350-261-20-1
SERVICE AND/OR BLACKOUT STOPLIGHTS MALFUNCTION — Continued
0033 00
3Y
1.
Turn MASTER SWITCH to OFF (see your -10).
2.
Remove front main harness circuit 75A plug (1) from
stoplight switch jack (2).
3.
Remove front main harness circuit 75B plug (3) from
stoplight switch jack (4).
4.
Measure resistance between switch jacks (2) and (4) with
switch depressed and with switch released.
5.
Does multimeter read infinity with switch depressed and 0
ohm with switch released?
3YN
1.
Replace stoplight switch
(WP 0290 00).
2.
Verify no faults found.
4Y
1.
Install front main harness circuit leads 75A and 75B
on stoplight switch.
2.
Remove instrument panel for access (WP 0238 00).
3.
Remove front main harness plug (1) from lighting
control switch jack (2).
4.
Measure resistance between front main harness plug (1)
pins K (3) and A (4) with both steering levers locked
in parking brake position.
5.
Does multimeter read less than 0 ohm?
4YN
1.
Faulty front main harness circuit
75A and/or 75B. Beyond unit
maintenance repair.
2.
Notify your supervisor.
003300-2
5Y
1.
Replace main light switch (WP 0242 00).
2.
Verify no faults found.