TM 9-2350-261-20-1
BLACKOUT MARKER LIGHT(S) AND/OR TAILLIGHT(S) DO NOT OPERATE — Continued
0034 00
5Y
1. Lowertrimvane(seeyour-10)
.
2.
Open power plant front access door (see your -10).
3.
Remove right headlight wiring harness plug (1) from front
main harness jack (2) at carrier bulkhead.
4.
Measure voltage between front main harness jack (2),
pinD(3)
,andground
.
5.
Does multimeter read less than 17 volts?
5YN
1.
Repair right headlight wiring harness
(WP 0312 00).
2.
Verify no faults found.
6Y
1.
Install right headlight wiring harness circuit 20 jack
on right BO marker light.
2.
Repair front main harness circuit 20 (WP 0312 00).
3.
Verify no faults found.
BY
1.
Check and see if only both BO taillights are out or only
both BO markers are out.
2.
Are only both BO taillights out or only both BO markers out?
BYN
GO TO
CY
(PAGE 0034 00-5)
003400-3