TM 9-2350-261-20-1
SERVICE AND/OR BLACKOUT STOPLIGHTS MALFUNCTION — Continued
0033 00
B3Y
1.
Remove instrument panel for access (WP 0238 00).
2.
Remove front main harness plug (1) from lighting
control switch (2).
3.
Measure resistance between lighting control switch plug
(1) pin C (3) to circuit 22 jack (4) (service stop) or pin N
(5) to circuit 23 jack (6) (BO stop).
4.
Does multimeter read 0 ohm?
B3YN
1.
Install rear main harness on taillight.
2.
Repair front main harness circuit 22
or 23 (WP 0312 00).
3.
Verify no faults found.
B4Y
1.
Install rear main harness plugs on jack and taillight.
2.
Replace main light switch (WP 0242 00).
3.
Verify no faults found.
003300-4