TM 9-2350-261-20-2
REPAIR LEFT/RIGHT STOPLIGHT/TAILLIGHT
0264 00
THIS WORK PACKAGE COVERS:
Removal (page 0264 00-1).
Clean, Inspect, and Repair (page 0264 00-1).
Installation (page 0264 00-2).
INITIAL SETUP:
Maintenance Level
Unit
Tools and Special Tools
General Mechanic’s Tool Kit (WP 0780 00, Item 29)
Materials/Parts
Preformed packing
Personnel Required
Unit Mechanic
Equipment Condition
Engine stopped/shutdown (see your -10)
Carrier blocked (see your -10)
Battery ground lead disconnected (WP 0294 00)
REMOVAL
1.
Loosen six screws (1). Remove retainer (2) from light housing (3).
2.
Remove preformed packing (4) from retainer (2). Discard packing.
3.
Push in on two small bulbs (5) and one large bulb (6). Turn each bulb counterclockwise and remove from light housing
(3).
CLEAN, INSPECT, AND REPAIR
1.
Check retainer and housing, replace stoplight/taillight if any part is missing or damaged (WP 0263 00 or WP 0265 00).
026400-1