TM-9-2350-261-20-2

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 2 OF 4

TM-9-2350-261-20-2 - Page 274 of 1008

TM 9-2350-261-20-2

REPLACE DISTRIBUTION BOX ASSEMBLY FOR 200 AMP GENERATOR SYSTEM

(M577A2 AND M1068 ONLY) — Continued

0266 00

WARNING

Adhesive, primer, sealant compounds, and isopropyl alcohol are toxic and flammable. These

compounds are toxic to eyes, skin, and respiratory tract. Continued exposure can make you

dizzy and irritate your eyes and throat.

Always use in well ventilated areas, away from heat, sparks, and flames. Do not breathe fumes.

Do not allow into contact with skin and eyes. Use goggles or face shield and protective gloves.

14. Apply one coat of adhesive to cleaned mounting surface of distribution box (1) and one side of new gasket (2).

15. Install new gasket (2) on coated mounting surface of distribution box (1).

FOLLOW-THROUGH STEPS

1.

Install master switch panel (WP 0224 00).

2.

Connect battery ground lead (WP 0294 00).

3.

Start engine (see your -10). Check that distribution box is operable.

4.

Stop engine(seeyour-10)

.

END OF TASK

0266 00-6