TM 9-2350-261-20-2
REPLACE RIGHT STOPLIGHT/TAILLIGHT — Continued
0265 00
INSTALLATION
1.
If removed, install two studs (7) in rear of stoplight/taillight (5).
2.
Place new gasket (6) and stoplight/taillight (5) on carrier hull. Secure with two new lockwashers (8) and two nuts (4).
3.
Connect circuit 24 lead (2) and circuit 23 lead (1) to stoplight/taillight leads (3).
FOLLOW-THROUGH STEPS
1.
Connect battery ground lead (WP 0294 00).
2.
Turn MASTER SWITCH to ON. Operate main light switches to check that left stoplight/taillight is operable. Turn
all switches OFF (see your -10).
END OF TASK
0265 00-2