TM 9-2350-261-20-2
REPLACE DOME LIGHT (ALL EXCEPT M577A2 AND M1068) — Continued
0273 00
INSTALLATION
1.
Place dome light (2) on two mount brackets (5). Slide four new lockwashers (4), one at a time, between dome light and
mount bracket (5) and secure with screws (3).
2.
Connect circuit 38 lead (1) to rear of dome light (2).
FOLLOW-THROUGH STEPS
1.
Connect battery ground lead (WP 0294 00).
2.
Turn MASTER SWITCH to ON (see your -10).
3.
Check that dome light operates properly (see your -10).
4.
Turn all switches OFF (see your -10).
END OF TASK
0273 00-2