TM 9-2350-261-20-2
REPAIR DOME LIGHT (ALL EXCEPT M577A2 AND M1068) — Continued
0274 00
1.
Remove eight screws (1) and retainer (2) from dome light body (3).
2.
Remove seal (4) from retainer (2). Discard seal.
3.
Push in on light bulb (5) and blackout bulb (6), and turn counterclockwise. Remove two bulbs.
4.
Remove screw (7), lockwasher (8), and knob (9) from retainer (2). Discard lockwasher.
5.
Remove nut (10), washer (11), gasket (12), and switch (13) from retainer (2).
6.
Remove setscrew (14), plunger (15), and plunger (16) from knob (9).
7.
Remove lens (17) and gasket (18) from retainer (2).
8.
Remove lens (19) from retainer (2).
CLEAN, INSPECT, AND REPAIR
1.
Check all light bulbs for damage and replace where needed.
2.
Check lenses, gaskets, and all other parts for damage. Replace all damaged parts.
0274 00-2