TM-9-2350-261-20-2

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 2 OF 4

TM-9-2350-261-20-2 - Page 324 of 1008

TM 9-2350-261-20-2

REPAIR DOME LIGHT AND MOUNT (M577A2 AND M1068 ONLY) — Continued

0276 00

1.

To disassemble dome light, do the following:

a.

Remove lens (1) and seal (2) from light door (3).

b.

Push in and turn lamp (4) counterclockwise. Remove lamp from light body (5).

2.

To disassemble dome light mount, do the following:

a.

Remove knob (6), nut (7), two small washers (8), two large gaskets (9), and mount plate (10) from bracket (11).

b.

Remove two large gaskets (9) from plate (10).

c.

Remove six locknuts (12), three washers (13), mount (14), and bracket (11) from hull mounts (15). Discard

locknuts.

CLEAN, INSPECT, AND REPAIR

1.

Check lamp. Replace burned-out or cracked lamp.

2.

Check lens. Replace cracked or chipped lens.

3.

Check seal and mounts. Replace cut, cracked, or hard seal and mounts.

4.

Check plate and bracket. Replace any cracked or deformed parts.

0276 00-2