TM-9-2350-261-20-2

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 2 OF 4

TM-9-2350-261-20-2 - Page 328 of 1008

TM 9-2350-261-20-2

REPLACE MASTER SWITCH PANEL LEAD ASSEMBLY TO DOME LIGHTS

(M577A2 AND M1068 ONLY) — Continued

0277 00

INSTALLATION

1.

Place new grommet (10) on branch of lead assembly (6) that connects to circuit 38E lead (9).

2.

Install lead assembly (6) with grommet (10) in master switch panel (4).

3.

Connect lead assembly (6) to circuit 38E lead (9), circuit breaker (8), and front dome light switch (7).

4.

Place master switch panel (4) on distribution box (5). Secure with eight screws (3), washers (2), and new locknuts (1).

FOLLOW-THROUGH STEPS

1.

Connect battery ground lead (WP 0294 00).

2.

Turn MASTER SWITCH to ON (see your -10).

3.

Operate dome lights to check that lights operate properly (see your -10).

4.

Turn all switches OFF (see your -10).

END OF TASK

0277 00-2