TM 9-2350-261-20-2
REPLACE ADMITTANCE BUZZER AND SWITCH (M577A2
AND M1068 ONLY)
0282 00
THIS WORK PACKAGE COVERS:
Removal (page 0282 00-1).
Clean, Inspect, and Repair (page 0282 00-2).
Installation (page 0282 00-2).
INITIAL SETUP:
Maintenance Level
Unit
Tools and Special Tools
General Mechanic’s Tool Kit (WP 0780 00, Item 29)
Materials/Parts
Gasket
Lockwasher (3)
Personnel Required
Unit Mechanic
Equipment Condition
Engine stopped/shutdown (see your -10)
Battery ground lead disconnected (WP 0294 00)
REMOVAL
1.
Disconnect circuit 509 lead (1) from buzzer (2) and buzzer switch (3).
2.
Remove three screws (4), lockwashers (5) and buzzer (2) from weldnuts on left bulkhead. Discard lockwashers.
3.
Remove nut (6), gasket (7), and buzzer switch (3) from rear bulkhead. Discard gasket.
028200-1