TM-9-2350-261-20-2

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 2 OF 4

TM-9-2350-261-20-2 - Page 346 of 1008

TM 9-2350-261-20-2

REPLACE HEADLIGHT HIGH BEAM SELECTOR SWITCH — Continued

0285 00

INSTALLATION

1.

Connect cable (5) to rear of switch (4).

2.

Install switch (4) in bracket (3).

3.

Secure switch (4) to bracket (3) with two new lockwashers (2) and screws (1).

FOLLOW-THROUGH STEPS

1.

Turn MASTER SWITCH to ON (see your -10).

2.

Turn on service headlights and operate beam selector switch to check that switch operates properly (see your -10).

3.

Turn all switches OFF (see your -10).

4.

Turn MASTER SWITCH to OFF (see your -10).

END OF TASK

0285 00-2