TM-9-2350-261-20-2

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 2 OF 4

TM-9-2350-261-20-2 - Page 340 of 1008

REPLACE RAMP DOOR SWITCH AND MOUNT (M577A2 AND M1068 ONLY) — Continued

CLEAN, INSPECT, AND REPAIR

1.

Check for cracks or other damage to switch. If damaged, replace switch.

INSTALLATION

1.

Place bracket (12) on hull. Secure with two screws (14) and new locknuts (13).

2.

Place actuator (8) on bracket (12). Secure with two screws (11), washers (10), and new locknuts (9). Do not tighten

screws.

3.

Place switch (4) on actuator (8). Secure with retainer (7), screw (6), and new locknut (5).

4.

Connect circuit 38C lead (3), circuit 38B lead (2), and circuit 38lead(1)torampdoorswitch(4)

.

0283 00-2

0283 00

TM 9-2350-261-20-2