TM-9-2350-261-20-2

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 2 OF 4

TM-9-2350-261-20-2 - Page 319 of 1008

TM 9-2350-261-20-2

REPAIR DOME LIGHT (ALL EXCEPT M577A2 AND M1068) — Continued

0274 00

ASSEMBLY

1.

Install lens (1) and lens (2) with gasket (3) on retainer (4).

2.

Install plunger (5) with plunger (6) in knob (8) and secure with setscrew (7).

3.

Install switch (9) through retainer (4). Install gasket (10) and washer (11) on switch and secure with nut (12).

4.

Install knob (8), new lockwasher (13), and screw (14) on switch (9).

5.

Install blackout bulb (15) and light bulb (16) in light body (17). Push in and turn bulbs clockwise to secure.

6.

Install new seal (18) on retainer (4).

7.

Place retainer (4) on light body (17). Secure with eight screws (19).

FOLLOW-THROUGH STEPS

1.

Install dome light (WP 0260 00).

2.

Turn MASTER SWITCH to ON (see your -10). Check dome lights for proper operation.

3.

Turn MASTER SWITCH to OFF (see your -10).

END OFTASK

0274 00-3/4 blank