TM-9-2350-261-20-2

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 2 OF 4

TM-9-2350-261-20-2 - Page 411 of 1008

TM 9-2350-261-20-2

REPLACE REAR MAIN WIRING HARNESS (M113A2, M901A1, AND

M1059 ONLY ) — Continued

0289 00

10. Remove screw (14), clamp (15), bilge tube clamp (16), and wiring harness (17) from weldnut (18).

11. Remove two screws (19), nuts (20), and clamp (21) from floor transverse beam (22).

12. Remove screw (23), nut (24), and clamp (21) from circuit 451 lead (25).

13. Remove screw (26), lockwasher (27), clamp (28), and circuit 451 lead (25) from weldnut (29). Discard lockwasher.

14. Remove two cradle clips (30) and circuit 451 lead (25) from two cradles (31).

15. If personnel heater is installed, disconnect circuit 402 lead (32) from personnel heater fuel pump (33).

16. If engine coolant heater is installed, disconnect circuit 402A lead (34) from engine coolant heater fuel pump (35).

028900-3