REPLACE REAR MAIN WIRING HARNESS (M113A2, M901A1, AND
M1059 ONLY ) — Continued
34. Remove two screws (1), lockwashers (2), and guard (3) from two weldnuts (4). Discard lockwashers.
35. Remove three screws (5), nuts (6), clamps (7), and wiring harness (8) from guard (3).
36. Remove eight screws (9), washers (10), and locknuts (11). Separate master switch panel (12) from distribution box (13).
Discard locknuts.
028900-7
0289 00
TM 9-2350-261-20-2