REPLACE REAR MAIN WIRING HARNESS (M113A2, M901A1, AND
M1059 ONLY ) — Continued
16. Install circuit 400 lead (9), circuit 2 lead (12), and circuit 6 lead (13) on bus bar (14). Secure with screw (15), new
lockwasher (16), and nut (17).
NOTE
Inspect gasket (21). Replace if damaged.
17. Install distribution box (3) on master switch panel. Secure with eight screws (18), washers (19), and new locknuts (20).
0289 00-13
0289 00
TM 9-2350-261-20-2