TM-9-2350-261-20-2
CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1
TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 2 OF 4
TM-9-2350-261-20-2 - Page 428 of 1008
REPLACE REAR MAIN WIRING HARNESS (M113A2, M901A1, AND
M1059 ONLY ) — Continued
49. Install circuit 38 lead (1) on three cradles (2). Secure with three cradle clips (3).
50. Install clamp (4) on rear dome light (5). Secure with screw (6) and nut (7).
51. Connect circuit 38 lead (1) to dome light (5).
FOLLOW-THROUGH STEPS
1.
Inst all r ear floor plate (
WP 0436 00
).
2.
Connect battery g round lead (
WP 0294 00
).
3 .
In stall s m oke gen e rato r fo g oil t ank m odu le (M1 059 O nly ) (
WP 0695 00
).
4.
Turn MASTER POWER SWITCH to ON (see your -10). Check that electrical system works properly.
5.
Raise and lock ramp (see your -10).
6.
Stop/shutdown engine (see your -10).
END OF TASK
0289 00-
20
0289 00
TM 9-2350-261-20-2
Back to Top
