TM-9-2350-261-20-2

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 2 OF 4

TM-9-2350-261-20-2 - Page 427 of 1008

REPLACE REAR MAIN WIRING HARNESS (M113A2, M901A1, AND

M1059 ONLY ) — Continued

43. Install rear main wiring harness (1), circuit 90 lead (2), and two washers (3) on two weldnuts (4). Secure with two

screws (5) and clamps (6).

44. Connect circuit 21 lead (7), circuit 22 lead (8), circuit 23 lead (9), and circuit 24 lead (10) to trailer wiring harness (11).

45. Connect circuit 451 lead (12) to rear bilge pump (13).

46. Install wiring harness (1) on bilge tube clamp (14). Secure with clamp (15), screw (16), and nut (17).

47. Route circuit 38 lead (18), circuit 23 lead (19), and circuit 24 lead (20) through clamp (21). Secure clamp to taillight

(22) with washer (23) and nut (24).

48. Connect circuit 23 lead (19) and circuit 24 lead (20) to right taillight (22) female connectors.

0289 00-1

9

0289 00

TM 9-2350-261-20-2