TM-9-2350-261-20-2

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 2 OF 4

TM-9-2350-261-20-2 - Page 418 of 1008

REPLACE REAR MAIN WIRING HARNESS (M113A2, M901A1, AND

M1059 ONLY ) — Continued

44. Remove two nuts (1), mounts (2) and (3), flat washers (4), and screws (5) that secure instrument panel (6) to two struts

(7).

45. Support panel (6). Remove two screws (8), flat washers (9), one lockwasher (10), and ground lead (11) from two mounts

(12) and upper support (13). Discard lockwasher.

46. Support panel (6) on two struts (7) to gain access to rear of panel.

47. Disconnect circuit 28 lead (14) from fuel gauge.

48. Disconnect circuit 451B lead (15) from rear BILGE PUMP ON indicator light.

49. Disconnect circuit 38 lead (16) from instrument panel wiring harness.

50. Disconnect circuit 450 lead (17), 450B lead (18), and 451A lead (19) from BILGE PUMP SWITCH.

51. Disconnect circuit 21 lead (20), circuit 22 lead (21), circuit 23 lead (22), and circuit 24 lead (23) from front main wiring

harness.

52. Remove rear main wiring harness from carrier (all carriers with inside fuel tanks).

0289 00-10

0289 00

TM 9-2350-261-20-2