REPLACE REAR MAIN WIRING HARNESS (M113A2, M901A1, AND
M1059 ONLY ) — Continued
28. Install lead (19), lead (20), and lead (21) through nut (22), bushing (23), and connector (24). Tighten nut on connector.
29. Install three new terminals (25), insulators (26), and connectors (27) on the ends of three leads installed in Step 28.
30. Connect circuit 24 lead (21), circuit 22 lead (20), and circuit 21 lead (19) to left taillight (28).
31. Install left taillight (28) and guard (29) on hull. Secure with four screws (30) and new lockwashers (31).
0289 00-16
0289 00
TM 9-2350-261-20-2