TM 9-2350-261-20-2
REPLACE STOPLIGHT SWITCH AND BRACKET — Continued
0290 00
3.
Loosen two screws (1) on switch (2).
4.
Pull both steering levers back to first notch and lock levers (see your -10).
5.
Place switch (2) against steering levers so that stoplight switch comes on.
6.
Release steering levers (see your -10). Stoplights should go out.
7.
T
ightentwoscrews(1)onswitch(2)
.
FOLLOW-THROUGH STEPS
1.
Turn all switches OFF (see your -10).
2.
Close power plant front access door and raise trim vane (see your -10).
END OF TASK
0290 00-3/4 blank